4.8 LBS / 2.2 KG
Bait Capacity

The new FD1+’s propulsion system is optimized to provide higher strength and higher efficiency than its predecessor, allowing the drone to lift baits weighing up to 2.2 kg with astonishing ease. This means that anglers can take advantage of heavy-duty baits to attract the biggest fish, confident that the drone will handle the load reliably.

Smooth Control ESCs

The integration of sine wave ESCs in the FD1+ ensures gentle and progressive motor acceleration, increasing stability when the drone starts lifting additional weights off the ground. The precise control provided by these ESCs also allows for delicate maneuvering and stable hovering, which is essential when positioning baits at specific GPS coordinates.

High Torque Motors

FD1+ is equipped with 4 brushless motors with low KV rating that are capable of producing high torque to generate enough thrust to lift heavy baits.

S6 Flight Controller

With improved responsiveness, the new S6 flight controller actively makes real-time adjustments to maintain the FD1+‘s altitude and balance, ensuring stable operation even with heavy baits attached.

High Voltage Batteries

FD1+ is powered by a high-voltage lihv 6S battery with the aim to increase the drone’s lifting capacity. With high power-to-weight ratio, the FD1+’s flight battery enable the drone to carry heavy baits without sacrificing flight stability, and has enough thrust to operate in challenging conditions such as strong winds.

GPS 9.0

With improved satellites connectivity, the latest 9th-gen GPS provides unparalleled precision and stability when anglers are navigating FD1+ to the specific fishing spot. The drone will maintain its position and course even in windy condition.

Calibration-free

Thanks to the S6 flight controller, anglers can deploy the FD1+ for fishing swiftly, bypassing the complicated calibration process. FD1+ can automatically calibrate its sensors to maintain stability and control during flight.

Slide-in Battery

Replacing the FD1+ battery is a breeze. Simply pop open the hatch, slide the battery into its slot, press the power button, and you're all set! Rest assured, the hatch is completely watertight, thanks to its rubber seal, ensuring everything stays dry when sealed.

Screw-on Propellers

The propeller's threaded design of FD1+ ensures a straightforward setup, securely fastening the propellers to prevent them from detaching during high-thrust situations when the motors are working at high speeds.

IP67
Saltwater-proof

The aircraft of FD1+ is entirely sealed, then air-pressure tested and dunk tested to guarantee 100% waterproof. The fuselage is made from marine-grade ABS to increase strength and prevent distortion.

Corrosion-free

The waterproof motors, waterproof bait release and internal electronics of FD1+ are coated with corrosion-resistant coating - adding an extra layer of protection against the salty air.

Self-Floating Design

We designed the FD1+ with sufficient buoyancy on the aircraft itself The drone can keep floating when landing on the water and take off again.

40 MPH Wind Resistance

With its robust propulsion system and the precision of GPS 9.0 technology, FD1+ is capable of holding its position and stability even in wind speeds reaching 40 mph / 35 knots.

Automatic Flip

Should the fishing drone inadvertently flip over in the water, the joysticks can be utilized to right it, restoring it to its upright orientation, after which you can pilot it safely back to shore.